Descriptions:
The Stainless steel 6W LED UNDERGROUD LIGHT Installation Guide
1. Make sure the power supply of housing to connect ground;
2. The power and signal output wire of the last light in each loop connected waterproof cap;
3. Make sure the controller and power supply to work in ventilated, dry environment;
4. Please make sure no short-circuit before using, or the components may be burned.
5. The length of The lamp between the power supply,The length of the lamp between the lamp
should not be more than 3meter.
6. The total length of the T wire should not be over 100meter.
It shows here that around the ground led should
fill with some gravel or sand when installation.it is
better forthe heat sinking and drainage.
Parameters:
Material: Stainless steel+Aluminium+tempered glass
LED Chip: High Power LED Chip
Voltage: 85-265V AC
Frequency: 50/60 HZ
Watt: 6*1w
Index(CRI) >85R
Constant Current driver + over-crrent protection
Color: white, red, green, blue, yellow, RGB is optional
Beam Angle: 300,450,600.
Life Span:>30000 hours,
Working Temperature:<60°C
Storing Temperature:-20~60°C
Working Environment Temperature:-20~60°C
Humidity:≤80%RH
Features:
1. LED underwater lights applied to the bridge, building exterior lines outline lighting.
2. LED underwater light Super bright LED of high quality LED power light or ultra-bright LED,
with low power consumption, low heat, long life, impact resistance, high reliability.
3. LED underwater lights are red, green, and blue color produce seven-color LED color mixing
effect, can meet different requirements of occasions on light colors.
4.LED underwater light color is pure, luminous uniform, through smoke, fog and strong. In the
smoke or fog can be seen clearly when. Is unmatched by any other source.
5.Long life, average life expectancy of up to 80,000 ~ 100,000 hours.
6.LED underwater lights have the power to open and close the way of control (light control) and
manual control (manual), with customers free to choose according to need.
7.Easy installation, low maintenance costs.
Applications:
High power led underwater light is the perfect solution for decorative illumination water
landscapes and illumination. With an IP66waterproof grade, it is perfect for Swimming pool,
ponds, fountain, aquariums, recreational facilities, decoration underwater, park lake, water
stage and other outdoor place for atmosphere decoration.Widely used in the fountain plaza,
swimming pool, swimming pool, park pool and other decorative lighting environment
There are currently no product reviews.
