Wall mount rgb led wall touch Panel(Screen)controller,12-24V DC

Descriptions:
This new generation of touch panels. it is designed to mount securely into a wall , or other flat surface.
and offers Touch Screen for Home and Building automation.Available with other port,they support a lot
of led.  No limits to connectivity. the Wall mount rgb led touch panel. it Can control any 12~24VDC LED
products using Pulse Width Modulation (PWM).Color selection wheel provides thousands of color optio
-ns or 17 dynamic color-changing modes with speed, dimming and ON/OFF controls.it has many advan
-tages such as convenient to connect,easy to use and others.  When you choose a controller,pls Refer
to operating instructions and parameters.

US Standard Touch Panel RGB led controller
Technical Parameters:

External Dimension:


Interface Specifications:

Controller instruction:
1.Touchpanel there are 4 buttons and a pulley key, the functions are as follows:

you could turn on/off controller at any state
mode key .you can choose a different kind of color change.total 11kinds of change
          patterns.press the key for long time.you can turn onoff the voice prompts.
touch for wall mountfunction5.jpg the output signal brightness or speed control,every
         time you press this button,the brightness or speed series add 1.altogether 100 levels;
touch for wall mountfunction6.jpg the output signal brightness or speed control,every
         time you press this button,the brightness or speed series add 1.altogether 100 levels;
Multi color pulley touch key.static mode choose key.more than 60 touch points.
        the button has tow functions:
        1 pulley static color choice key.so when the current control mode is Mkey mode(color)
          .if must realize pulley static color.can press this key
        2.pulley color switch key.can change from 60 kinds of static colors(as the pulley shown).
          Is there a wall mount for the  security touch sceen.

Applications:
Designed for commercial and residential applications.

Installation Method:
1.open the touch panel
(1) as shown in figure,use screwdriver in touch panel gently pry gaps,Take the panel;

(2) As show in figure:the flat cable taken down.open the lock connection seat,take the flat cable

2.wiring
 In the typical application.reference typical application circuit
3.Installation switch base
 As shown in figure,connected line will touch installed on the wall in the cassette controller
 ,screw in screw,make fixed in the wall,will be installed base to the wall
4.cover touch panel
  According to step up good row line,lock flat cable lock,cover panel.
Remarks:
1.Connect the load wire at first.following by the power wire;Please ensure short circuit can not occur
    between connecting wire before you turn on the power;
2.power supply voltage rangle is DC12~24V,more than voltage range maybe will burnout the controller.

Summarization:
      We can provide not only touch panel RGB LED controller,this is Wall mount rgb led wall touch Panel
  designed to fit in standard wall switch boxes. Can control any 12~24VDC LED with touch panel(,increa
-sed the touch sensitivity, reduces by mistake triggered.),so Probably the best deal for a Wall mount rgb
led wall touch Panel.