The DMX512 LED Controller module that is small but powerful controller transforms.it is standard
digital control signals into PWM controller signals for driving LED strip and has the ability to make
different effects such as dimming,ramping,twinkle and shimmer. This is an easy pannel control led
controller has 27 channels and Each output channels can handle a max of 1A per channel/color.
||7 channel 9 group
|Max. Load Power
|Output of channel
||each channel 1A max
Each DMX common controller occupied 27 DMX addresses,adopt coding switch set address,it is
a Binary numerical code switch which is setting DMX original address code from 1 to 9,1 is the lowe
-st and 9 is the highest, 511 address codes could be setted in all. DMX original address code equal
aggresgate value from 1 to 9, dial the coding switch upwards (ON is setted 1),the value of bit can be
gotten,on the contrary,the value of bit is 0,For example:if you want to set 37 as the address code,you
can only dial down the first.the third and the sixth code switch value from 1 to 9 is 32+4+1,that is, the
original address code of DMX512 is 37.
The DMX start channel is set from a DIP switch,so no external programmer is required.A Red LED on
the controller indicates DMX power and signal. The Input and Output power has screw terminals and
XLR 3P connectors for DMX-512 In/Out.
There are currently no product reviews.