The DMX512 Receiver&Transmitter is 2.4Ghz ism frequency rx rx wireless controller.it's
transmits to adopt standard DMX512 protocol data (transmits standard DMX512 protocol
data ) controller to led lights,The wireless controller have the problem ( lighting controller
issues of wireless transmitting) which solve the user.it's Portable and easy to handle. In a
brief statement the transmitting/receiving standard DMX512 protocol data of console,and
the master-slaver on linesignal of the same kind of lighting each other.this product adopt
2.4g ISM frequency section (global opening section)without permission limited higheffecti
-ve GFSK modulate,communication design;126 frequencies band,FH design,and frequen
-cy hopping synchronization automatically. high anti-jamming ability.
||2.4G wireless DMX512
||Single key to operate,tricolor LED indicator
|The LED indicator bright
||No DMX or wireless signal
|Red LED flash
|Green LED flash
||126 frequencies band, FH design, and frequency-hopping synchronization automatically.
|Function of ID
||7 groups ID code to set these different wireless nets without any interfere each other in the same place.
||12VDC 500mA min.
||400M（visible distance, it has some different base on environment）
|Max transmitting power
|Work frequency section
||2.4G ISM,126 channels.frequency section
||3pin female plug
1: XLR 2: Input voltage 3: Tricolor LED Indicator 4: ID Key 5: RF Antenna
Transmitter and Receiver
1. XLR wireless DMX512
2. Used as DMX512 signal reciever
3. Plug in and play function
Wireless dmx led Application:
3.Large literature performance
5.Temporary stage performance
6.City lighting system
11.Bar lighting and so on.
Power on DMX512 wireless received board and transmitted board.
1. ID code and LED color corresponding relateship:
Wireless Transmitter/Receiver is used in LED lighting installation&Connecting Scheme:
2. Press key 1 time to indicate ID setting,,Press again to set IC,then ID value adding 1 each time.by press
3. Working condition:
LED constant lit up:no DMX or wireless singal.
Red LED flash:transmitting.
Green LED flash:receiveing
4. RF frequency- - - - - - - - - - - - 2. 400-2. 525 G,total 126 channels,it’s searching automaticly,
5. ID Code- - - -“1-7” groups ID code,press ”KEY” for setting,it only can works under same ID code.of transmitter and receiver
DMX512 wireless receiver/transmit standard DMX512 protocol data (generated by console) by wireless way, which
solves lighting issues of wireless transmitting completely between console and lighting, lighting and lighting and so
on, it get rid of connecting cable limited completely. And also can ensure without any time delay when signal data
is transmitting, signal data is real time and reliably.
This product adopt 2.4G ISM frequency section (global opening section) without permission limited. High effective GFSK modulate
communication design. 126 frequency band ,FH design, and frequencyhopping synchronization automatically.
Indoor use only. One(1) year warranty, repair, free replacement except damaged artificially. The manufacturer will not offer free ser
-vice in warranty period if any repaired or uncapped had happenedIt is better to return to manufacturer if repair is a must,do not do
any repairing job unless qualified electrician.The working condition should be under temperature -20~+45 degree, 10%~90%RH,no
congelation, so as to ensure its lifetime.
It can not be covered by any superstratum, it should be swept periodical to prevent dust.
DMX Transmitter( male plug)
DMX Receiver(female plug)
Power Supply(If possible, hope the buyer could tell us which plug do you need .Or we will ship the plug according buyer's country.)
There are currently no product reviews.