This is Wireless SD card DMX512 signal transmitter with remote control(There are siit keys on the remote
controller panel.the function of each key as follows;)
it is used for controlling a variety of lamp whose source of light is LED.kinds of change pattern ,the wireless
dmx has many advantages such as easy connection and simplicity to use; According to the actual need of
customer The cutomer can carry out the jumpy changing, gradual changing, hose rising, Chase and other
function. User can also edit the data flies through the incidental pattern editing software (Led Editor v1.0),it
has Panel controller controller adopts the advanced micro-control unit, easy to use ,The specific method of
editing software see instructions. anyway, it is easy to use , The specific method of editing software and
parameters pls see instructions as follows;
|Support the channel number
|Remote transmitting powe
|Static power consumption
|Support the channel number
SD card and power input interface
Adopt conventional DC power transposon as power input interface.and equip with DC plug.
DMX signal output interface:
Uses three core card imperial throne to take the signal output connection.
Direction for Use:
1. Connect the load wire at first, following by the power wire; Please ensure short circuit can not occur between
connecting wire before you turn on the power;
2. There are six keys on the remote controller panel, the funtion of each key as follows:
ON/OFF: you could turn on/off controller at any time;
MODE: the color change button,there are 21 modes of change for you to choose;
B+: A brightness control button,the step of the brightness add 1 by each pressing,a total of 256 steps;
B-: The step of the brightness subtract 1 by each pressing;
S+: The step of the speed change add 1 by each pressing,a total of 100 steps.
S-: The step of the speed change subtract 1 by each pressing.
3.Make sure SD card is formatted(FAT32)
4.Without SD card or SD card reset is not successful.the system plays pre-change programs(seven-color transiti
-ons)and the green indicator light is off ( in normal operation green light will blink according to the speed of the
program) through this phenomenon user can find the problem. if plug card in controller, pls re-power on reset.
5.After turn on the power.controller will search all led files in the SD card.from small to large senation
to play the program.Therefore,name the file in the SD card that can refer to the following of naming.
6.If you want to pull out and plug in the SD card please power off first,otherwise the files in the SD card will be broken.
7.Supported maximum number is 64 pcs of the led file, when there is more than 64pcs led file in the SD card, only the
first 64pcs can be work.
8.All 16 programs are the setted by our factory,if customer need the program what they want, they can DIY
it by themselves,according to the relevant document.
There are currently no product reviews.