WS2812B LED With Heatsink(100pcs smd5050 RGB led ws2812)

Descriptions:
Here is WS2812B LED With Heatsink.the WS2812B is an RGB LED with a WS2812B control
IC built right into the LED. This really  blew our minds to see the control IC of an individually.
WS2812B family is a intelligent control LED light source that the control circuit and smd5050
RGB led With eatsink.it is Control circuit and RGB chip are integrated in a package of 5050
components(100xsmd5050 RGB led ws2812)form a complete control of pixel point.and Full-
color module, Full color soft lights a lamp strip. the WS2812B LED With Heatsink applicable
to  Full color soft lights a lamp strip,LED decorative lighting...

The WS2812B LED With Heatsink prameter:
Absolute Maximum Ratings

Electrical Characteristics(T_A=-20~+70,V_DD=4.5~5.5V,V_SS=0V,unless otherwise specified)

RGB IC characteristic parameter

Data transfer time( TH+TL=1.25µs±600ns) 

I.Features and Benefits

l         Intelligent reverse connect protection, the power supply reverse connection does not damage the IC.
l         The control circuit and the LED share the only power source.
l         Control circuit and RGB chip are integrated in a package of 5050 components, form a complete control of pixel point.
l         Built-in signal reshaping circuit, after wave reshaping to the next driver, ensure wave-form distortion not accumulate.
l         Built-in electric reset circuit and power lost reset circuit.
l         Each pixel of the three primary color can achieve 256 brightness display, completed 16777216 color full color display,
          and scan frequency not less than 400Hz/s.
l         Cascading port transmission signal by single line.
l         Any two point the distance more than 5m transmission signal without any increase circuit.
l         When the refresh rate is 30fps, cascade number are not less than1024 points.
l         Send data at speeds of 800Kbps.
l         The color of the light were highly consistent, cost-effective.. 

II.Applications 
l         Full-color module, Full color soft lights a lamp strip.
l         LED decorative lighting, Indoor/outdoor LED video irregular screen.

III.General description 
  WS2812B  is a intelligent control LED light source that the control circuit and RGB chip are integrated in a package of 5050
components.  It internal include intelligent digital port data latch and signal reshaping amplification drive circuit.   Also include
a precision internal  oscillator and a  12V voltage programmable  constant  curre-nt control part,  effectively ensuring the pixel
point light color height consistent.  The data transfer protocol use single NZR communication mode.   After the pixel power-on
reset,  the DIN  port receive data from controller,the first pixel collect initial 24bit data   then sent to  the internal data latch,the
other data which reshaping by the internal signal reshaping amplification circuit sent to the next cascade pixel through the DO
port.after transmission for each pixel,the signal to reduce 24bit.pixel adopt auto resha-ping transmit technology,making   pixel
cascade number is not limited the signal transmission, only depend on the speed of signal transmission. LED with low driving
voltage,environmental protection and energy saving,high brightness,scattering angle is large, good consistency,low power,long
life and other advantages.  The control chip integrated in LED   above becoming more simple circuit, small volume, convenient
installation.

According to the above A picture of the product, we can see that:
These RGB LED are an easy way to add complex lighting effects to a project.Each LED has an integrated driver that
allows you to control the color and brightness of each LED independently.