Descriptions:
This is DMX512 decoder& driver.the Decoder is designed to convert the universal standard DMX512/1990
signal into analog signal to control our RGB Flex Strips.and This RGB LED LMAP DMX 512 decoder adopt
the advanced micro-computer control technology of digital signal widely used in international to the analog
control signal.1~3 channels output for option and each channel able to achieve 256 gradations of controll.
It is mainly used for the controlling of buildings & lights applied LED.
Features:
• Comply with DMX512 international standard protocol
• DMX signal states of DMX signal detection and indication function,can distinguish normal,pause,error
• 3 output channels,5 levels current, ( 300mA , 350mA,500mA, 650 mA, 700mA)
• Up-regulation setting function, 5 levels
• Can easily set DMX address by button
• With the light color selected mechanism,and be able to control the light with 1~3 colors
• 256-level brightness, full-color control,with control system, can express perfect effect
• For customer setup and use easily, the default address code is 1
• Address setting become brightness setting when DMX signal isn’t connection
The DMX 512 decoder Technical Parameter:
| Decode Ch. |
3Ch |
| Input Signal |
DMX-512/1990 digital signal |
| Output Signal |
can drive 6A max(Each CH.) |
| Power Supply |
DC 12~24V |
| Power Dis. |
Power Dis. <1W |
| Power Output |
<432W(24V);<216W(12V) |
| Operating Temp |
-20~50 °C |
| Size |
168(mm)x51(mm)x22(mm) |
| Weight |
160g |
Interface Introduction:
*DMX signal interface
Please put attention on the polarity of DMX Signal if DMX signal isn't connected corrent,follows error will display
1,The DMX signal is not properly connected,current address and will be displayed on LED by loop and interval 2S;
2,The DMX signal is paused,current address and P will be displayed on LED by loop and interval is 2S,
The DMX512 decoder& driver Wiring instruction:
(1)DMX signal input interface
(2)Power input interface
(3)Display LED
(4)Keys for address setting
(5)Driver output interface
Installation Interface Description:
• DMX signal interface
Please put attention on the polarity of DMX Signal.if DMX signalisn’t connected correct,follows error will display
1) The DMX signal is not properly connected, current address and --- will be displayed on LED by loop and interval 2S;
2) The DMX signal is paused, current address and P will be displayed on LED by loop and interval is 2S;
3) The DMX signal is nomal, current address be displayed only;
• Power input interface
DC 12-24V input, supply power for decoder and the lamps it takes.
• Address setting keys
Address can be saved automaticlly, address can be recovered when next power on
1) Key”M”,used to lock or unlock address setting fuction,nomally address can’t be seting.When long press
this key for 3 seconds, the dot in the bottom right of LED will be on, used to indicate unlocked, you can
change the address after setting address, long press the "M" key 2S or do not press any button 5S, the
dot will be off, indicating that the address code is locked and can not be modified
2) KEY”+”, used for add address number, short press address add 1 each time , long press address will
be changed very fast, reduce setting time, the maximum address is 511
3) KEY”-”, used for minus address number,short press address mimus 1 each time,long press address will
be changed very fast, reduce setting time, the minimum address is 0 Remark:The default address code
is 1
• Driver output interface Common anode, V+ and R,G,B interface can drive kinds of RGB module or single
-color module,Can regulate output current according to the actual load.
Remark:
Connect the anode and RGB wire of common anode RGB module to the output interface of decoder dire
-ctly;Connect the anode wire of single-color module to V+on decoder,and connect the cathode wire to one
of RGBpin according to the LED’s color;connect several colors single-color module to one decoder,please
connect their anode wires to V+ pin on decoder.
Thr DMX512 decoder& driver size:
There are currently no product reviews.
